The external port of the EV charger can be connected to an external smart meter (optional), and the EV charger can self-identify the available power provided by the power grid to the charging point. This means that the E-Series adjusts the charging power in real time according to the remaining power of other loads.
With its simple shape and distinctive U-shaped lights, the E-series became the winner of the 2019 IF Design Award and received praise from many European users.
All black ASA shell with high weather resistance. The neat, compact design makes it one of the most popular EV chargers.
By connecting to a smart device via Wi-Fi or Bluetooth and using the LINCHR smart app, the charger can be easily remotely controlled.
We use the German brand of ‘Bender’ for our AC/DC sensitive residual current monitoring module. This increases the safety of the charging process.
Reduced cost and time to install makes it remarkable for installer and customer and everyone’s favourite.
LINCHR E-Series is intelligent and is adaptable for all electric vehicles. Its modern design fits any garage or home. Load management requirements and built in MID needs can be satisfied here. All our solutions meet the highest security and efficiency standards, so you can be sure that you can rely on your LINCHR for many years.
You will ever have to worry about tripped fuses or using all your appliances at the same time.
LINCHR E-Series chargers automatically cuts back on charging when you use other electronics, so you never have to worry about it, or change a fuse again!
The Electric Vehicle Homecharge Scheme (EVHS) is a grant that provides a 75% contribution to the cost of one chargepoint and its installation. A grant cap is set at £350 (including VAT) per installation. The £350 home charge point grant is going to run until 31st March 2022.
LINCHR has been accredited by the Office for Zero Emission Vehicles (OZEV) meaning it qualifies for the Home Charge Grant or the Workplace Charging Grant. If eligible, you can reduce the cost of your Home Charger by £350 and Workplace chargers by up to £14,000.
-How much electricity is available for the charging infrastructure?
-With what power do you want to charge the car?
-How many cars will be charged at the same time now and in the future?
-Is there enough signal reception at the installation site? Is there a need for a WLAN access point or repeater/adapter?
Yes, certainly. E-series support OCPP1.6J and can connect to the backend you want, and you can contact me to check it.
Yes, the LINCHR Webapp can support you to view the charging record online, including your charging start and end time and charging power.
The E-Series charger can charge using a type 2 connector according to EN 62196-2. The type 2 connector complies with the European standard.
As a standard, we provide two RFID cards. But if you have additional needs, you can contact us for consultation.
Yes, you can, because the LCTC E-Series has a protection level of up to IP54, IK08, which is extremely effective against weather and collision.